Custom sheet-metal work, built to match.
SARD Industries is a practical sheet-metal workshop for custom parts, fabricated assemblies, signage, and production work. We work from drawings, samples, measurements, and ideas.
Mission Statement
One workshop, from drawing to finished part.
SARD Industries fabricates custom sheet-metal parts in Lahore: cutting and forming in the die shop, joining in the welding department, and finishing with chemical pretreatment and powder coating. The same team owns the part from the first drawing to the final finish, so nothing is handed to another supplier.
3
WORKSHOP DEPARTMENTS UNDER ONE ROOF
14
MACHINES AND WELDING PROCESSES LISTED
Drawings, samples, or measured dimensions
Forming, welding, and powder coating
How a job moves through the workshop
One route for a single prototype and for a repeat run. Each stage happens in the building next to the last one.
Requirement
Drawing, sample, or dimensions
You send an engineering drawing, a physical sample, or measured dimensions. Material, thickness, finish, and quantity are confirmed before production starts.
Requirement
Drawing, sample, or dimensions
You send an engineering drawing, a physical sample, or measured dimensions. Material, thickness, finish, and quantity are confirmed before production starts.
Forming
Cut, bend, and shape in the die shop
Press, hydraulic press, lathe, drill, and shaper work turns sheet, plate, and tube into the finished shape.
Forming
Cut, bend, and shape in the die shop
Press, hydraulic press, lathe, drill, and shaper work turns sheet, plate, and tube into the finished shape.
Welding
Assemble and join
CO2, argon (TIG), electric, gas, and spot welding, chosen for the joint and the material rather than by default.
Welding
Assemble and join
CO2, argon (TIG), electric, gas, and spot welding, chosen for the joint and the material rather than by default.
Finishing
Pretreat, powder coat, and cure
Degreasing and chemical pretreatment, powder application, and oven curing, all in the powder coating department.
Finishing
Pretreat, powder coat, and cure
Degreasing and chemical pretreatment, powder application, and oven curing, all in the powder coating department.
Handover
Check against the drawing, then dispatch
The finished part is checked against what was agreed before it leaves. A repeat order follows the same route.
Handover
Check against the drawing, then dispatch
The finished part is checked against what was agreed before it leaves. A repeat order follows the same route.
Workshop in numbers & facility location
A single workshop in Lahore, Pakistan, serving industrial and commercial clients with custom sheet-metal work.
3WORKSHOP DEPARTMENTS: DIE SHOP, WELDING, POWDER COATING
14MACHINES AND WELDING PROCESSES DOCUMENTED
4MATERIAL FAMILIES: MILD STEEL, STAINLESS, ALUMINIUM, TUBE
1SUPPLIER FOR FORMING, WELDING, AND FINISHING
Who owns what in the workshop
The responsibilities behind dependable custom metal work, and who to ask for them.
Workshop Management
Requirements, scheduling, deliveryTakes your drawing or sample, confirms material and finish with you, and keeps the job to the handover date that was agreed.
Die Shop Lead
Cutting, forming, and machiningRuns the press, hydraulic press, lathe, drill, and shaper work that turns raw sheet into the finished shape.
Welding Lead
Assembly and joiningSelects the welding process for the part and owns fit, distortion, and the strength of the finished joint.
Finishing Lead
Pretreatment and coatingRuns chemical pretreatment, powder application, and oven curing so the finish is even and durable.